Jump to content

P: CarPC Centrafuse WinXP 8" VGA Touchscreen


TheUndYinG

Recommended Posts

Prodajem CarPC u kompletu sa Faytech 8" Touchscreen-om. Kucishte sam pravio od pleksiglasa i dimenzije su 1DIN s tim shto ide u dubinu malo vishe nego standardni plejeri za kola... CarPC nikada nije bio ugradjivan jer imam drugi koji koristim, kucishte nije zalepljeno i mozhe josh da se modifikuje ko kako zheli mozhda neka folija kao shto je kod mene :P display je korishcen samo za probu na stolu nije nikada bio u autu, ima samolepljivi nosach koji nije korishcen, u pitanju je industrijska serija Faytech-a izdrzhava vishe vlazhnosti, jako visoke i niske temperature, vecu ulaznu voltazhu i zadnji deo kucishta je od metala, dolazi u kompletnom pakovanju sa VGA kablom, USB kablom za touch, napajanjem za upaljach 12v, AV kablom, daljinskim, touch pen-om i ja mislim COM (serial) kablom jer je industrijski pa touch mozhe na USB ili na serial port, ima HDMI ulaz, 2x AV ulaz, 1x VGA ulaz i usb/serial touch u pitanju je LED BACKLIT display tako da je vidljiv i na suncu napred ima USB port. Fizichka rezolucija 800x600 podrzhava rezolucije do 1080p fullHD... u svom autu imam faytech "obichnu" seriju oko 3god i nisam imao problema ni po vrucini ni kad je minus...

CarPC ima 1GB DDR2, 1.6 intel atom, SSD od 12GB, 3G Modem, wifi, SDcard reader, 3xUSB 2.0, 1x LAN port, Line-in/mic, line-out 3.5mm, VGA-out, sim card slot, 2 zvuchnika, 1.3 kameru (mozhe se produzhiti da stoji bilo gde u autu), 2 mikrofona "array".

Instaliran je WinXP sa MINlogon-om, EWFvolume (ewfmgr) HORM (hibernate once resume more) znachi sa enablovanim EWF managerom WIN se ponasha kao FIRMWARE sve promene na particiji posle restarta nestaju tako da je sistem stabilan i uvek se vraca u ono stanje u kojem je enablovan EWF, kada se disabluje EWF mogu se odratiti podeshavanja po potrebi ili npr snimiti muzika na C particiju da bi posle restarta ostala na SSDu. Kada je EWF enablovan postoji mogucnost za HORM, uradi se hibernacija i PC se posle SVAKI put vraca u tu hibernaciju bez obzira kako je ugashen, ja mom izvuchem napajanje tj. kada ugasim auto PC izgubi napajanje u toku rada, sledeci put kad dam kontakt, pc se pali tako shto se dizhe iz hibernacije koja je uradjena nekad i pre mesec dana i uvek se vraca u isti "state" svakako to sve nije obavezno ali to je najbrzi nachin da dobijete muziku kada upalite kola :) EWF se enabluje po particijama tako da npr ako postoji externi HDD na njemu ne bi morao da bude EWF enablovan i mozhe da se menja sadrzhaj HDD-a tipa muzika spotovi etc i da posle restarta ostanu memorisani... Instaliran je RAMDISK i windows je optimizovan za rad sa SSDom tako da je dosta brz, pc je nechujan radi u potpunosti bez coolera... Pri startovanju windowsa podizhe se Centrafuse http://centrafuse.com/ po meni najbolj CarPC interface... Imam i mini tastaturu i touchpad s tim shto su na flat i treba da se produzhe za korishcenje u autu (poslednje 2 slike)

img9755f.th.jpgimg9757z.th.jpgimg9759e.th.jpgimg9761u.th.jpg

img9763sz.th.jpgimg9767h.th.jpgimg9770f.th.jpgimg9773i.th.jpg

ph123oto2.th.jpgphoto1olh.th.jpg

photo2tvd.th.jpgphoto3qot.th.jpgphoto4mw.th.jpg

photo5wx.th.jpgphoto53o.th.jpg1234412.th.jpg354343.th.jpg

CarPC specs

CPU & Chipset Intel® Atom N270

Memory 1GB (DDR2)

Wireless Data Network WLAN: 802.11 n

Hybrid Storage XP: 12GB Solid State Drive

Camera 1.3M Pixel

Audio Dolby Sound Room Certified (XP only)

Stereo speaker

Digital Array Mic

Faytech 8" VGA touchscreen

http://faytech.de/product_show.php?id=36

faytech´s 7-10" Touch Monitor Series sets new standards: HDMI port, three video inputs, extended current input (12-36V), extra robust components, exclusive design, mountable, Backlight LED, no pixel faults, high-quality pedestal, extended temperature range and suitable for 24/7-operation are just some of the features that these monitors fulfill.

Accordingly, the Touch Monitors can be used in a broad scope of applications: to use with a HTPC, as surveillance monitor, TV monitor, in the industrial area, in kiosk systems, as cash monitor or information terminals, for machine control, home automation, on farm machinery, forklifts, wind turbines and telematics (in particular transport telematics) and in many other areas.

The integrated touch panel is robust and accurate. Using the included software for gesture control, you can individually program your PC and completely control it with your hand or the included pen (with cord). The touch function is easily established via the USB port of your PC, for industrial users the touch screens have for touch connection a serial port.

The high resolution support (e.g. 1080p, 1920x1200 pixels) of these faytech touchscreens make it suitable for a wide variety of applications.

Touchscreen drivers included for all popular Microsoft (CE, WinXP, Vista, Windows 7), Mac and Linux operating systems.

Key Points:

• VGA and HDMI port

• Three video inputs: 1x S-Video, 2x Video, one with auto-switching with signal on

• USB port, USB and serial touch connection

• extra reinforced and high-quality components for use in harsh environments

• Laser-labeled buttons & housing to prevent abrasion

• built-in stylus pen with cord fixation on housing

• metal rail and VESA-75 mounting on the back of the housing

• 12-36V DC / DC input

• Innovative cable concept with lockable cable connections

• Extended working temperature range, explicit suitable for 24/7-operation

• Back Light LED with 250nits brightness and 20,000h operation time, for project customers are series with 450-1500Nits and 30.000h operation time available (100 + Lotorder)

• highly flexible and highly stable pedestal specially designed for the touch-screen series

• special case design perfect for installation into machines or cabinets etc. because of flat back case of 8" and 10" and mounting frame of 7"

• Three case colors: white, black & silver, more colors to order (50+ Lotorder)

• high-quality speakers in the front

• Monitor picture is both vertically and horizontally mirrored through direct button in the front

• IP65 version available (50+ Lotorder)

MONITOR SPECS

Specification

Display case (cm)

19.80x16.80x3.22

Screen diagonal (Inch/cm)

8/20.32

Display (cm)

16.20x12.15

Mounting

Pedestal(included), additional VESA-75 on the back case

Gross weight (including packaging, kg)

2.30

Net display weight (kg)

0.65

Aspect ratio

4:3

Physical resolution

800X600

Maximum showable resolution

1920x1200

Colours displayed

262,144

Brightness (cd/m2)

250

Contrast

500:1

Typical reaction time Tr; Tf (ms)

10/15

Visual Angle horizontal, vertical (°)

140;120

Working power (V)

12~36

Power consumption (W)

5

Stand-By-Consumption (W)

<0.5

Operating temperature (° C)

-25~+75

Touch-panel

4-wire resistive

Touch-connector

1xUSB port, 1xserial port

Touch-panel-driver

Windows, Linux, Apple

Touch life (contacts)

1million in one location without failure

Response time touch-panel (ms)

< 10

Surface hardness

3H

Input force (g)

20 ~ 150

Connectors, video

2x Video(1x back cam view), 1xS-Video, 1x VGA,1x HDMI

Connectors, audio

1x Headset out; 2x Audio-In,

Connectors,other

1x USB port

Power-supply (included in delivery)

230V, 12V

Additional features

OSD-menu, Loudspeaker, Remote Controller, Touch-pen

Cena u kompletu 350eu

Kontakt PM

O63/80-88-55-NULA

Link to comment
Share on other sites

×
×
  • Create New...